Pillar Spokes: Bladed Spoke XTRA-1422

$1.89

Pillar PSR X-TRA 1422 Butted Aero spokes are made from Sandvik T302 (18/10) alloy. They are cold drawn and cold-forged using patented Pillar Technology.

 

Description

Pillar XTRA-1422  Triple-Butted Bladed Aero spokes are: 2.0mm|0.95mm*2.2mm|2.0mm.

They are thickest at the elbow (2.0mm) and at the threaded section (2.0mm) – where failures often occur.
The bladed section is 2.2mm wide and 0.95mm thick.
They will fit any standard, round 14G spoke hole and don’t need special slotted hubs.
Breaking Strength: 280 kgf
Fatigue: (180kgf , 10Hz): 200,000 Cycles
Spec Chart for Pillar 1422 Bladed Spokes

 

These spokes can be used with Alloy or Brass external nipples, or with internal alloy nipples or even special locking internal alloy nipples.
Upgrade your external nipples with Taper Grip (Alloy or Brass nipples), for added security.
For added strength, consider M-Power …or go all in and add BOTH!
You can choose to add a little security by adding washers: internal nipples on alloy rims,  for internal nipples on carbon rims, or for external nipples on alloy or carbon rims.
Just add 1mm to your calculated spokes lengths.

We offer a spoke wrench for external nipples or spoke tools for internal nipples in various sizes.

Additional information

Spoke Length

241mm, 243mm, 245mm, 247mm, 249mm, 251mm, 253mm, 255mm, 257mm, 259mm, 261mm, 263mm, 265mm, 267mm, 269mm, 271mm, 273mm, 275mm, 277mm, 279mm, 281mm, 283mm, 285mm, 287mm, 289mm, 291mm, 293mm, 295mm, 297mm, 299mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…