BDop Cycling Fully Sealed Adventure, Gravle, XC Cable and Housing Kit: Gear

BDop Gear Cables and Housing Kit: Adv/Gravel/CX

Name: BDop Gear Cables and Housing Kit: Adv/Gravel/CX
SKU: CABLES/HOUSING: GRAVEL-GEAR
Price: 29.99 USD
Availability: InStock

$29.99

BDop Cable and Housing kits offer weight savings, reduced friction, and increased durability.

These kits have 3500mm of housing so that you can run completely sealed housings on your Adventure/Gravel/CX bike.

The inner wires are compatible with Shimano, Sram, or Campagnolo levers.

Weight for the entire kit (before sizing) 104g

INNER CABLE FEATURES:
PTFE coated
Pre Stretched
Extremely hard-wearing
Reduced fraying
Reduced flaking or peeling
SHIMANO/CAMPAGNOLO compatible.

HOUSING FEATURES:
Gear housings: 35% lighter than Shimano
Alloy and stainless steel: Saves weight. Adds stiffness
High-Strength Fiber Casing: Crisp shifting.

ALLOY FERRULE FEATURES:
Crush ribs ensure a perfect fit
Watertight seal
Brass inserts protect from damage, over time.

LENGTHS:
1. 2 Inner wires: 3100mm and 2500mm
2. 4mm Gear Housing: 3500mm total length

SKU: CABLES/HOUSING: GRAVEL-GEAR Categories: 12-speed, 10spd, 11spd, BDop Cycling Design, Cables and Housing, Campagnolo, Gravel/Adventure, Shimano, Shimano/Sram, Sram, weight weenie, XCross Tags: gear cables, gear housing

Description
Reviews (0)

Description

INNER CABLES:
All BDop inner cables use 19 strands of Stainless Steel wire. They are PTFE coated. Prior to the coating process, each strand is chemically modified to improve the bond strength of the PTFE to the stainless steel surface. Unlike other cables, our coating doesn’t peel off and clog the housing. Our inner wires have excellent ultra-low friction characteristics and reduced corrosion. They are efficient and durable.

GEAR HOUSINGS:
Gear cable housings have 19 strands of wire. They are a combination of alloy and stainless steel. The alloy saves weight while the stainless steel strands add stiffness and protection.
A High-Strength Fiber encases the wires to keep things tight so nothing is lost between the shifter and the derailleur.

ALLOY FERRULES:
The crush ribs on the outside guarantee a snug fit in all cable stops and barrel adjusters. Two ribs, on the inside of the ferrule, and a rubber grommet, create a watertight seal.
The ferrules have brass inserts. This protects them from damage, or from splitting, over time. The floating nose section increases the effectiveness of the seal. It can angle into any frame stop.