| The
D771SB is a solid front hub that is
designed for road, cross or XC riders using 6-Bolt Disc
brakes. |
| By changing
sidecaps it can be changed between: |
| 1. Quick
Release |
| 2. 9mm*100mm |
| 3. 12mm*100mm |
| 3. 15mm*100mm |
| The
BDop R135-11 is the only hub on the
market designed specifically for disc brake road bikes.
Virtually everyone else is repurposing MTB hubs instead.
|
| The
difference in chain line between road bike components
and MTB components and how it can affect shifting performance. |
| The
BDop R135-11 is designed as a Thru
Axle hub. It can be configured as a normal Quick
Release hub, or you can quickly and easily
swap out axles to 10mm*135mm, 12mm*135mm
or even 12mm*142mm. |
| The
BDop R135-11 uses two ENDURO ABEC5 Angular
contact bearings as the outer most bearings to address
radial loads and 2 ENDURO ABEC5 sealed bearings as the
inner most bearings. |
| $99.99US |
|
| WORLDWIDE SHIPPING |
|
D771SB
/ BDop R135-11 Set |
 |
| The
D771SB is a solid front hub that is
designed for road, cross or XC riders using 6-Bolt Disc
brakes. |
| By changing
sidecaps it can be changed between: |
| 1. Quick Release |
| 2. 9mm*100mm |
| 3. 12mm*100mm |
| 3. 15mm*100mm |
| The D772SB-11
is a solid Thru Axle rear hub that is designed for 10/11spd. |
| If you
want to swap wheels between bikes and you have different
frames, simply change the axle and sidecaps and you're
ready to go. You do NOT have to re-dish your wheel!
|
| Axles
can be changed quickly and easily between: |
| 1. Quick
Release, |
| 2. 10mm*135mm
Thru |
| 3. 12mm*135mm
Thru |
| 4. 12mm*142mm
Thru |
| The
D772SB-11 uses Japanese EZO bearings. |
| The
D772SB-11 comes stock with the Novatec ABG
freehub to prevent your cassette damaging your freehub
body. |
| $99.99US |
|
| WORLDWIDE SHIPPING |
|
D771SB
/ D772SB-11 Set |
 |
|
|
| |
| With
winter riding lights become a necessity. But with those retina
burners, your computer and that fancy new bell where do you
put your hands? |
| The Dashboard
Genie SOOPER D-LUX
features not one but two of the same machined aluminium clamps
and hardware as other Dashboard Genie models.
Added to this is a carbon arm that is not 70mm long, not even
170mm long, but a whopping 240mm long! That's
right, 240mm. There may even be room for
the kitchen sink with this baby! |
| The BDop Dashboard
Genie SOOPER D-LUX
is also available with the Ti bolt upgrade |
| Weight:
129g - Fits 26.0 or 31.8 Bars |
|
 |
| BDop
SOOPER D-LUX |
|
|
| $39.99US |
| WORLDWIDE SHIPPING |
|
|
